NUX MG-400 multiefekti
Hinta:
255,00
€
Tälle tuotteelle toimituskulut alk. 7,00 € (Postipaketti)
Määrä: kpl
UUSI NUX MG-400 multiefekti, supersuositun MG-300:n isoveli
512 IR mallinnusta
25 kitaravahvistinta
25 kitarakaiutinta
8 bassokaiutinta
3 akustisen kitaran IR mallinnusta
4 mikrofonimallinnusta 3:ssa eri asennossa
USB Audio Interface
Luupperi
512 IR mallinnusta
25 kitaravahvistinta
25 kitarakaiutinta
8 bassokaiutinta
3 akustisen kitaran IR mallinnusta
4 mikrofonimallinnusta 3:ssa eri asennossa
USB Audio Interface
Luupperi
512 samples IR resolution and USER slot with each patch.(additional 12 IR COLLECTION slots)
IMPULSE RESPONSE
10 INDEPENDENT FLEXIBLE BLOCKS
You can move signal blocks freely on the MG-400 and/or QuickTone editing software. Set the PATCH LEVEL block in front of AMP to swell the volume. Put DELAY block in front of gain stage to create grooving riffs. There are lots of tone creations with the flexible block routing.
NG, CMP, EFX, AMP, IR, EQ, MOD, DLY, RVB, P.L | 10 independent moveable signal blocks.
SCENE FUNCTIONALITY
Use SCENES to engage/disengage blocks with either CTRL footswitch.
You can assign CTRL1 or CTRL2 to trigger the SCENE Functionality. Each preset has 3 scenes, which are snapshots within a preset. This is a powerful function for live gigs. Each SCENE can engage/disengage signal blocks freely, and it retains the DELAY / REVERB trails when you disengage them with SCN CTRL.
Jam ( Drum & Looper )
The MG-400 supports NUX Phrase Loop Synchronization with Rhythm. You can play the rhythm then record your phrase loop. MG-400 will automatically beat match the phrase to fit the current rhythm BPM.
*Choose either STEREO / MONO looping. (Stereo is 30 seconds, mono is 60 seconds.)
Two Recording Modes
*NR = Normal Recording works as regular loop function, while you press CTRL1(LOOP) footswitch, it starts to record the phrase loop.
*AR = Auto Recording will stand by while you press CTRL1(LOOP) footswitch, once you hit the strings, it will start to record your phrase loop.
Editor Software
You can download the QuickTone™ editor from the MG-400 product page. An intuitive interface is provided for tweaking parameters, dragging block order, setup SCN, save patches, load patches, export patches, load IRs, set up USB routing and CTRL SETTING; all by simply using QuickTone™.
Arvostele tämä tuote
Tälle tuotteelle ei ole vielä annettu arvosteluita.